How To Make A Knife Sheath

How to Make a Knife Sheath – DIY Guide for Outdoor Enthusiasts

A knife is a handy tool for all types of campers. Whether you are an amateur outdoor enthusiast or a seasoned hiker, you can’t deny the numerous benefits of knives in various camping work. You need to keep it within your reach but keeping such a sharp tool open could be dangerous. Covering it with a leather sheath could be the easiest solution. But, do you know how to make a knife sheath? Handcrafting one gives you the freedom to choose the design and materials. You can customize it any way you want – to keep in your backpack or wear on your belt.

Contents

How to Make a Knife Sheath – A DIY Guide

You can purchase a knife cover from any retail store. But, crafting one by your own will be more satisfying. Besides, a camper should learn some DIY skills as these can be proved to be lifesaving in hostile conditions.

Leather material
Leather material will last for a long time.

How to Make a Knife Sheath – Materials and Tools

  • Leather – 5 to 6 ounces (Use vegetable tanned shoulders so that you can wet-form them and stamp and carve decoratively)
  • Cardboard
  • Rotary cutter or X-ACTO knife
  • Rowel wheel
  • Groover tool
  • Leather-stitching needles
  • Fid
  • Waxed artificial sinew or thread
  • Pencil
  • Spring clips
  • Dishtowel
  • Tape
  • Saran wrap

>> You may also like: How To Wear A Boot Knife For First-timers <<

How to Make a Knife Sheath – Procedures

After collecting all these tools and materials, follow this procedure step by step to make a knife sheath in your home. You can apply the same process to craft a casing for a cell phone, pocket watch, and similar devices. You just have to guess the right measurement of the leather piece.

Step 1: Sketch the Outline

Put the knife on the cardboard sheet and draw a rough pattern around the blade and the handle. Put the knife on its other side and draw another pattern just beside the first one. A bigger outline is preferable than a smaller one. There will be an extension at the side of the handle (for making a loop), so the pattern won’t be symmetrical.

draw the pattern
Draw the pattern on a paper or cardboard piece.

Step 2: Cut and Adjust the Outline

Cut the pattern with scissors, fold it in half along the line, and place the knife inside it. Trim the sides with scissors to give the paper cutting the right shape you want for the sheath.

Use adhesive tape or glue to attach the open ends and give the paper cutting the shape of your leather casing. Make the required adjustments so that it becomes the closest thing (in terms of shape and measurement) to the sheath that you are going to make.

Expose one side of the handle by cutting the pattern. The other side will be as it as with the extra length for the belt loop.

Step 3: Cut the Leather Pattern

Draw the outline on the suede part of the leather. Cut it out with the rotary cutter but use the X-ACTO knife for snipping the belt loop part. Using a rotary cutter for this part may cause overcut and ugly nicks.

Step 4: Form the Leather

Take a bowl full of hot water and put the leather cutout into it. Keep it there for a few minutes until it is properly soaked in. Then, take it out and squeeze into the dishtowel to remove the water.

forming the leather piece
Soak into water for forming the leather piece.

Wrap the entire knife with two to three layers of Saran wrap. Use tape to keep everything together. When the leather piece is almost dry, place the wrapped knife on it and fold over the shape of the sheath. Secure the form by using spring clips.

Step 5: Dry the Leather Cut-out

Set the clipped sheath aside to dry but check after every five minutes during the first hour to see if the leather is forming the way you want. If required, press or rub with your fingers to give it the desired shape. The leather can take several hours to a day (depending on the weather) to dry properly. Remove the clips and be ready to move to the next step.

Step 6: Trim the Casing

The next part of this how to make a knife sheath tutorial is to trim and stitch the casing. Trim the excess parts and uneven edges with the rotary cutter. Use a cutting knife too if needed but do it slowly. Otherwise, you may leave the edges uneven.

Step 7: Make the Holes

Cut a shallow groove on the sheath with the leather gouge. Use the rowel tool to stamp the stitches in the groove. Mark at least 6 holes in every inch and punch the holes with the fid. Keep the sheath on a solid surface and use a rubber mallet to pummel the fid.

Step 8: Stitch the Belt Loop

You can stitch up the casing before attaching the belt loop but the easier option would be to sew the loop first. Fold the flap over to the front and trim (if required). The end of the flap should be just below the top part of the casing.

stitch the belt loop
Stitching the belt loop.

Punch holes with the fid into the end part of the loop and the top of the sheath (where you intend to attach the loop). Stitch by using needle and sinew.

>> Read more: How to Sharpen a Knife with a File <<

Step 9: Seam the Sheath

The next stage of this how to make a knife sheath lesson is to stitch the casing. Apply a single needle technique for sewing from the bottom to the upper part. A double needle technique is also fine but not necessary since it is a small casing.

Once you reach the sheath’s tip, turn around and do another layer of stitching so that the thread does not unravel in any case. Tie the knot.

Use a solid item such as the head of a rubber mallet or the wooden part of the fid, rub onto the seam so that the stitches sit flush onto the grooves.

You are done! Insert the knife into the sheath and attach the loop to your belt for a proud display

Leather knife sheath
Voila! It’s done!

Conclusion

The casing will appear to be a bit snug at first. However, it will loosen up a bit over time. If you use high-quality leather, it will last for years to come. If you’re an outdoor lover who love living in the wilderness, it’s interesting to know how to make a knife sheath by your own and bring it along with you every survival or camping trip!

Last Updated on May 11, 2018

4.4/5 - (5 votes)

Leave a Reply