rv sewer hose storage

RV Sewer Hose Storage: Here is All You Wanted To Know About

The purpose of the sewer hose is to remove human wastes and associated products stored in the vehicle holding tanks. So it goes without saying that the hygiene level of recreational vehicles is influenced by the RV sewer hose storage. All it takes is a mistake with the hose storage and you would compromise the sanitary condition of your vehicle. That being said, where you should you keep the sewer hose of your RV? It’s not like you could squeeze it underneath the sink.

Contents

Commonly-Used Methods To Store The Sewer Hose Of RV

So in the case you really don’t know how to tackle the issue of RV sewer hose storage, this article is for you. Take a good look at these methods and figure out the ideal place for your hose.

1. Bumper

Similar to ordinary water hoses, you should be able to store the sewer hose in the bumper of your RV. In case you are a novice RVer, the integrated bumper of numerous recreational vehicles is hollow which serve as a storage area for RV hoses. Because the bumper is separated from the vehicle body and you could access it at moment notice, many people store their sewer hoses in there. On the downside, substances from the sewer hose would degrade the structural integrity of the bumper as time goes by.

rv mod sewer hose bumper

2. Hose Carriers

In the case you want to carry an additional length of sewer hose, you could consider using plastic hose carriers. For most of the time, it would not take too much effort for you to attach these carriers to the undercarriage of your recreational vehicle. Designed to be adjustable, the hose carriers could match a wide variety of RV setup and arrangement with relative ease. All things considered, the carriers are easily accessible and prove to be a great way to store the sewer hose. Obviously, you must spend some money to get the carriers.  

3. Makeshift Compartment

The final method is to produce an RV sewer hose storage using materials like PVC. Spare/discard parts such as LP tank covers, fence posts and alike should work as well, there are multiple RV sewer hose storage ideas available. By making your own sewer hose storage, you would save a couple of dollars and you could customize the storage area as you see fit. In exchange, it may require a lot of time and effort to produce a proper DIY RV sewer hose storage. Furthermore, if you are not careful, the RV sewer hose may even get damaged by abrasive surfaces, sharp corners, screws, …  

Constructing RV Sewer Hose Storage: Tips And Tricks For Novices

If you truly want to put together your own RV sewer hose storage, here is a short guide for you. It contains everything you must remember while assembling a storage compartment for your sewer hose. Follow the guide and you should be able to finish constructing the hose storage in a blink of an eye.

sewer hose storage for rv

1. Use Suitable Tools And Gears

Generally speaking, you don’t really have to go after advanced stuff, you could find virtually everything you need in your toolbox and local stores. In the usual case, you should prepare a handsaw, a screwdriver, a power drill and a couple of miscellaneous items. As the project involves sharp tools and a lot of dust, you must put on protective gears at all time. A pair of goggles, gloves and face-mask would be sufficient for most of the time. Before you could start doing anything, make sure that the working environment is well lit and shielded from the wind.

2. Think About The Storage Material  

The storage should be made of something that could withstand outdoor weathers and keep the hose out of harm way.  Polyvinyl chloride (PVC), polyethylene and polypropylene are all excellent materials for hose storage given their robustness an ease of use. Of course, feel free to use others materials for your storage as long as it meets your needs and requirements. In order to determine how much material the storage compartment requires, grab a tape ruler and obtain the hose measurements. Base on the obtained numbers, you would have a general idea about the size and shape of the storage compartment.  

DIY RV sewer hose storage

3. Take Your RV Into Account

Different recreational vehicles would have different dimensions and that is why you have to take your own RV into account. Fortunately, if you are good at improvising on the spot, you should be able to adapt anything to your vehicle. All you have to do is to make sure that the storage compartment is not protruding at an odd angle and that should be it. Before securing the hose storage, mark the bolts and screws position so you don’t weaken the compartment by mistake.

4. Process The Sewer Hose Storage

It’s of utmost importance that you take care of the rough edges and jagged surfaces of the hose storage. An unrefined storage compartment could puncture the sewer hose or cause injuries you so you have to process it thoroughly. Use a couple of pieces of high grit sandpaper in order to smoothen every nook and cranny of the storage. Stay focus while processing the storage compartment, one moment of carelessness and you would make irreparable damages so be careful.  Once you are done, push the sewer hose into storage and pull it out repeatedly to determine whether the compartment needs additional works or not.

rv sewer hose storage ideas

5. Orient The Sewer Hose Storage

After you finished making the compartment, the only thing left for you to do is to attach the hose storage to your recreational vehicle undercarriage. To ensure that you could access the compartment without much difficulty, you have to orient it in a proper manner. Once the hose storage is at an ideal location, secure it with bolts and screws. If you decide to mount more than one hose storage, it’s strongly advised that you keep the compartments paralleled. That would simplify the task of orienting the compartments and allow you to connect the sewer hoses at moment notice.

https://www.youtube.com/watch?v=MLAvi33zWyg

Last Updated on September 30, 2018

5/5 - (3 votes)

Leave a Reply